Jones Snowboards Ultralight Solution & Spark Splitboard Pakke

Ultralight Solution Splitboard

Spark Arc Splitboard Binding

Size:
S = 35-40
M = 40-44
L = 44+

Lightweight and Surfy
The Arc splitboard binding is lightweight for long tours, epic overnighters, trees, and steeps. The baseplate is CNC machined with maximum cutouts to shave weight yet maintain strength and performance while incorporating our industry-leading Tesla T1 binding anatomy. All Arc bindings feature a medium flex version of our Rip ‘N’ Flip highbacks and smaller profile Pillow Line ankle straps with flex windows for a nice surfy ride down. Every piece of this binding is made in-house with the exception of a few screws and the buckles!

Pillow Line Straps
Arc Pillow Line Straps are lightweight – 46% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride. Arc ankle straps are smaller around the boot than the Surge and feature a flex window for max agility while maintaining support. The toe straps come in one construction for both Arc and Surge models,and are designed to be used as a toe cap but also fit traditionally over the top.

Rip ‘N’ Flip Highback
The R&D shines with a shape built from 3D scans of popular splitboard boot models, and a list of rad features designed specifically for and fully appreciated by the splitboarder. The Arc highback has a moderate amount of glass fiber fill for medium flex and a surfy feel. The tool free forward lean adjuster (FLAD) offers complete customization from 0° to 22° in ride mode. The Forward Lean Adjuster toggles easily between forward lean position and -13° touring position for easy transitions.

Whammy Bar Climbing Wire
A single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12°), to high (18°) and back again while touring.

Puck Compatibility
Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindingsare designed to work with all puck compatible splitboard models. When used with Arc bindings conveniently access puck screws with the bindings in place for precise stance adjustment. Available in a flat and a 3° canted model.Note that pucks do not come with the bindings out of the box and must be purchased separately.

T1 Heel Rest
The T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 Step Locker in place.

Buckles & Plastics
Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range,performing well on spring tours as well as sub-zero suffer fests. All straps incorporate Burton’s time-tested bomber buckles.

Spark R&D Pucks
Channel-like stance adjustability for splitboards built with inserts. Believe it.
This breakthrough in design has riders beyond stoked , and has made Spark Pucks our most popular splitboard accessory.

Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindingsare designed to work with all puck compatible splitboard models. When used with Arc bindings conveniently access puck screws with the bindings in place for precise stance adjustment.

Weight: 289 g

Aluminum Disks: Oversize aluminum center disk overlaps binding channels for maximum strength and rigidity.

Adjustability:
+/- 6.5mm of toe/heel adjustment, 1.3mm increments.
+/- 30° angle adjustments in 3° increments.

Stance width adjustments – 4.2mm increments.
Superior Materials:Bindings slide on soft nylon for effortless installation.

Hitchhiker Splitboard Binding

Boot Size Guide

XS : 36 – 38.5
S : 38 – 41
M : 42 – 44
L : 43,5 – 47

Comfortable on the up, capable on the down. Get in the fast lane with splitboarding’s most dialed and reliable binding.

It will be ten miles from civilization when you truly appreciate the premium comfort, strength, and proven performance of this Burton x Spark R&D brainchild. A revolution in splitboard-specific performance, the Burton Hitchhiker binding pairs the easiness of Spark R&D’s Tesla T1 System baseplate with exclusive features like the Hammockstrap™ and Supergrip Capstrap™, both featuring the speed and strength of Double Take buckles. Topped off with an exclusive hi-back featuring skintrack-friendly negative Forward Lean options, this is the best possible solution for ruling the ups and downs of backcountry touring.

Response : Stiff
Baseplate : Spark R&D Tesla T1 System [Machined Aluminum]Hi-Back : Burton-Designed Single-Component Hi-Back Construction,
Negative Lean Hi-Back, Quick-Adjust FLAD™
Ankle Strap : Hammockstrap™
Toe Strap : Supergrip Capstrap™ 2.0
Buckles : Double Take Buckles
Cushioning : True OTT Hi-Back Padding
Features : Re-Ground Materials to Reduce Waste

Mounting:
Splitboard mounting system is lightweight and hassle free, interfacing with any channel puck mounting system.