Jones Snowboards Solution X Spark Dyno DH ATK Hardboots Splitboardpakke

Solution Splitboard
The ultimate all-terrain splitboard.

Ideal for backcountry freeriding and wilderness exploration.

The ultimate all-condition split. The Solution is the ultimate all-terrain splitboard and delivers unrivaled backcountry performance in any snow condition.

Flex : 8/10

Featuring a directional freeride shape, directional rocker profile and a mid-stiff flex, the Solution is playful in soft snow, yet confidence inspiring on steep, hard snow. We’ve completely redesigned the Solution’s shape for 2021 by adding more taper and a 3D Contour Base 3.0. The tapered shape sinks the tail in pow for better float and the 3D Contour Base makes every turn more fluid and effortless. For added response the Solution is built with our premium Ultra core, Flax/Basalt Power stringers and an ECO-plastic topsheet. The Solution also features the Boltless Bridge plus Karakoram Ultra Clips and Tip-Lock Tip Clips for unmatched torsional board lock and Inner/Outer Traction Tech 3.0 for added edge grip going up or down.

Freestyle : 80%
Allmountain : 90%
Powder : 90%
Speed : 80%

Directional Rocker
A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch. «My experience is that most falls in freeriding start from the nose of the board – you either go over the bars in powder, the nose gets caught under a weird crust and tosses you, or you hit a hard tranny at the contact point of the tip and get bucked. Directional Rocker eliminates most of these falls.» – Jeremy Jones

The Dyno DH is our acclaimed hardboot specific splitboard binding. It is designed to fit a variety of touring boots from different brands and delivers high-end performance to the growing hardboot segment of splitboarders. All parts are designed and manufactured by us from start to finish for the all-around precision that you can only get from a Spark made product.

Dyno DH Bindings are for riding only. Carry them in your pack on the way up, while using your tech toes for touring. Then slide the Dynos on your pucks and lock into place with the snap ramps for the ride down. Fits boots with 255 – 340mm sole length.

Weight:0.90 lb/ea (409g) – 1.80 lb/pr (818g)

Compatibility and Setup
Spark Flat Pucks compatible (Spark Canted Pucks recommended)

Spark R&D Black Splitboard Canted Pucks
All the same great features of our Spark Pucks, but with 3° canting for reduced knee strain.
Near infinite adjustability for splitboards with inserts. Quick mounting with super fine foot placement, angle, and toe/heel centering adjustments.

Weight: 11.36 oz/pr (322g)

Channel-like stance adjustability for splitboards built with inserts. Believe it.
This breakthrough in design has riders beyond stoked , and has made Spark Pucks our most popular splitboard accessory.

Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindings are designed to work with all puck compatible splitboard models. When used with Arc bindings conveniently access puck screws with the bindings in place for precise stance adjustment.

FEATURES

Aluminum Disks: Oversize aluminum center disk overlaps binding channels for maximum strength and rigidity.

3° Canting: With 3° of canting to reduce strain, your knees will thank you.

Oversize Disk: Center disk overlaps binding channels for maximum strength and rigidity.

Adjustability: near infinite adjustability, for your perfect stance placement.

+/- 1/4 inch (6.5mm) of toe/heel adjustment in .5 inch (1.3mm) increments.

+/- 30° angle adjustments in 3° increments.

Stance width adjustments: .17 inch (4.2mm) increments.

Superior Materials: Bindings slide on soft nylon for effortless installation.

Compatible with all splitboards using the industry standard splitboard insert pattern.
For use with all puck compatible splitboard bindings (with the exception of the K2 Kwicker)

Not Compatible with Burton channel style splitboards or DIY splitboards (without the industry standard splitboard insert pattern).