Jones Snowboards Solution & Spark Pro Splitboard Pakke

Solution Split
The ultimate all-terrain splitboard.

Ideal for backcountry freeriding and wilderness exploration.

The ultimate all-condition split. The Women’s Solution is the ultimate all-terrain splitboard and delivers unrivaled backcountry performance in any snow condition.

Featuring a directional freeride shape, directional rocker profile and a mid-stiff flex, the Women’s Solution is playful in soft snow, yet confidence inspiring on steep, hard snow. We’ve completely redesigned the Solution’s shape for 2021 by adding more taper and a 3D Contour Base 3.0. The tapered shape sinks the tail in pow for better float and the 3D Contour Base makes every turn more fluid and effortless. For added response, it’s built with our premium Ultra core, Flax/Basalt Power stringers and an ECO-plastic topsheet. The Women’s Solution also features the Boltless Bridge plus Karakoram Ultra Clips and Tip-Lock Tip Clips for unmatched torsional board lock and Inner/Outer Traction Tech 3.0 for added edge grip going up or down.

Spark Arc ST Pro Splitboard Binding

Size:
XS = < 39
S = 39-41
M = 41-43
L = 43+

ST Touring Brackets
ST Touring Brackets incorporate the best features of aluminum and thermoplastics. We overmold our custom plastic blend over and through the holes in the aluminum base, forming bushings that last four times longer than their previous brass version.

ST Whammy Bars
The ST Whammy Bar Climbing Wire is built right into the baseplate. Overmolded plastic where the bar contacts the baseplate allows for super-smooth climbing wire position changes in the steeps. You can switch easily from stowed, to low (12°), to high (18°), and back again while touring.

Pillow Line Straps
Arc ST Pro Pillow Line Straps are made with premium Pebax® plastics. They are lightweight, durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Arc ST Ankle Straps are smaller around the boot than the Surge and feature a flex window for max agility while maintaining support. Toe straps are designed to be used as a toe cap, but also fit nicely as a traditional strap across the top of the boot.

Puck Compatibility
Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Spark R&D bindings are designed to work with all puck-compatible splitboards.

Tesla Snap Ramp
T1 System bindings slide sideways into the offset Tesla touring bracket and lock into place with our snap ramp. No pins, no cables, no fiddle factor. Integrated Ibex crampon mounting claws on touring brackets make for easy installation and removal. Pivot pins have been hollowed out and are 33% lighter than standard pins.

Custom Hardware
Weight savings add up by replacing stainless steel hardware with custom-made 7075-T6 aluminum hardware. Aluminum parts are 65% lighter than our standard stainless steel parts and are made with hex drives instead of phillips heads which are less likely to strip.

Buckles And Plastic
Ladders and adjusters are produced in-house with Pebax® premium thermoplastics which maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests. It’s also 20% lighter than our standard material. All straps incorporate Burton’s time-tested bomber buckles.

Spark R&D Pucks
Channel-like stance adjustability for splitboards built with inserts. Believe it.
This breakthrough in design has riders beyond stoked , and has made Spark Pucks our most popular splitboard accessory.

Slide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode. Period. Spark R&D bindingsare designed to work with all puck compatible splitboard models. When used with Arc bindings conveniently access puck screws with the bindings in place for precise stance adjustment.

Weight: 289 g

Aluminum Disks: Oversize aluminum center disk overlaps binding channels for maximum strength and rigidity.

Adjustability:
+/- 6.5mm of toe/heel adjustment, 1.3mm increments.
+/- 30° angle adjustments in 3° increments.

Stance width adjustments – 4.2mm increments.
Superior Materials:Bindings slide on soft nylon for effortless installation.

Hitchhiker Splitboard Binding

Boot Size Guide

XS : 36 – 38.5
S : 38 – 41
M : 42 – 44
L : 43,5 – 47

Comfortable on the up, capable on the down. Get in the fast lane with splitboarding’s most dialed and reliable binding.

It will be ten miles from civilization when you truly appreciate the premium comfort, strength, and proven performance of this Burton x Spark R&D brainchild. A revolution in splitboard-specific performance, the Burton Hitchhiker binding pairs the easiness of Spark R&D’s Tesla T1 System baseplate with exclusive features like the Hammockstrap™ and Supergrip Capstrap™, both featuring the speed and strength of Double Take buckles. Topped off with an exclusive hi-back featuring skintrack-friendly negative Forward Lean options, this is the best possible solution for ruling the ups and downs of backcountry touring.

Response : Stiff
Baseplate : Spark R&D Tesla T1 System [Machined Aluminum]Hi-Back : Burton-Designed Single-Component Hi-Back Construction,
Negative Lean Hi-Back, Quick-Adjust FLAD™
Ankle Strap : Hammockstrap™
Toe Strap : Supergrip Capstrap™ 2.0
Buckles : Double Take Buckles
Cushioning : True OTT Hi-Back Padding
Features : Re-Ground Materials to Reduce Waste

Mounting:
Splitboard mounting system is lightweight and hassle free, interfacing with any channel puck mounting system.